Wedge Wire Panel

JX Filtration May 11, 2024 Wedge Wire Panel

The wedge wire panel is composed of screen wires and support rods, featuring high strength and excellent flatness. It can be made into various shapes such as rectangular, square, circular, and sector-shaped.

Applications:

Used in industries such as petroleum, papermaking, chemical, and food processing.

Materials:

304, 304L, 321, 316L, 904L, 2205, Hastelloy, etc.

Large Size:

Width (wire-wrapping direction) 3000mm * Length (rod direction) 6000mm, with a minimum gap of 0.02mm.

Product Features:

Non-blocking: The cross-section of the wire on the screen pipe is triangular, and the screen gap on the screen pipe is formed by the two adjacent acute angles of the wire.
High strength: Due to the welded structure of stainless steel wire, the stainless steel screen plate has high strength.
Large flow rate: This type of screen plate has relatively small resistance, compared with plastic filter cores of similar dimensions, greatly increasing its flow area, thus increasing the flow rate under the same resistance.
Good adaptability to temperature changes: Obviously, compared with ordinary plastic filter cores, the temperature range of Rely stainless steel wedge wire screen plates is much better.
Adjustable gap: Different users use different filtration equipment and filter media to adjust the gap to achieve their porosity.
Corrosion resistance: For neutral water, acidic water, alkaline water, sulfuric acid, table salt, etc., as long as these materials are properly selected, the filtration equipment can operate economically and normally.