Wedge Wire Screen ⁽¹²⁾

The Wedge Wire Strainer utilizes stainless steel wedge wire welded screen, which is composed of stainless steel wedge wire welded to support rods. Also known as: Wedge Wire Filter Element, Trapezoidal Wire Filter Rod, V-shaped Wire Filter Rod, Johnson Filter Element, Filter Candle, Wrapped Wire…

Polyurethane Screen Panel The polyurethane screen panel is welded from flat steel framework, with the framework assembly being a design challenge. It is a new type of fine selection product that has gradually replaced stainless steel screen plates in recent years. Polyurethane screen plates are…

Water well screens, also known as Vee-wire screens, are made of V-shaped or wedge-shaped wires surrounding an internal array of longitudinal support rods. The slot size could be between 0.1 and 3 mm. It is designed as the intake portion of wells constructed in unconsolidated…

Water intake screens, also called passive intake screens and wedge wire intake screens, are constructed of non-plugging V-shaped wires with continuous and smooth slots. Spot welded onto wedge wire support rods, the intake screen provides a large open area and low flow rate across the…

Wedge wire filter, also known as wedge wire filter screen, is installed on the filter equipment to achieve the filtration of particles and liquids. The fineness can reach 0.02 mm-20 mm. Wedge wire filters are constructed of triangle or wedge wire surface profiles with continuous…

Wedge wire Screen is composed of stainless steel triangular wire surface profiles and stainless steel support rods (triangular wire, round rod, flat rod or wedge wire). It forms a variety of V-shaped grooves with a narrow top and a wide bottom, with high flow rate,…

Wedge wire screen is widely used in oil, gas and water wells for sand control as well as in chemical and environmental industries where its application is particularly important. It is one of the most widely used filter tubes in various oil and water recycling…

Johnson screen is composed of support rod and wedge wire. The support rod can be either round wire or trapezoidal wire (cuneiform wire, V-shaped wire, triangular wire). The wedge wire is triangular wire, with accurate gap size and high filtering accuracy. It is characterized by…

The structure of wedge wire screen is welded by the parallel arrangement of the wedge wire and the support rod of the vertical mesh. The cross section shape of the screen is V-shaped, and the plane is above the mesh, the lower end is a…

The wedge wire screen is composed of wedge-shaped wire and support rods. It is formed by fully automatic CNC machining and welding through the resistance seam welding process, and the production process is relatively mature. The lap joint of the wedge-shaped winding wire and the…